View CH1224_4819325.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AUDIBLE/VISIBLE
NOTIFICATION
Chime and Chime/Strobe
Models Available Chime/Strobes Red CH24MC Chimes Red CH1224 White CH1224W White CH24MCW
CH1224
Accessory Mounting Plates Red S-MP BBS White S-MPW BBSW
CH24MC
Product Overview Chime meets UL 464 requirements for private mode Strobe meets UL 1971 requirements Field-selectable tones - Repeating 1 second chime - Repeating 14 second chime - Temporal 3 chime - Single stroke chime - Continuous / 3kHz - Continuous / 500 Hz - Temporal 3 / 3kHz - Temporal 3 / 500 Hz Three volume options Mount to standard back boxes Available in red or white System Sensor's SpectrAlert wall-mount electronic chime and chime/strobes offers sixteen different field-selectable chime tones, each with three volume settings. Intended for private mode applications, the SpectrAlert chime meets UL 464 and the chime/strobe meets UL1971. Flexibility. SpectrAlert products offer the flexibility to meet a broad range of
requirements. SpectrAlert chimes and chime/strobes feature sixteen field-selectable electronic tones, with three different volume levels for each. Chime/strobe models are available in 15, 15/75, 30, 75, and 110 candela configurations.
Installation. SpectrAlert chime and chime/strobe offer DIP switch tone selections
to simplify field configuration. In addition, each device mounts to standard depth back boxes for greater installation flexibility. Small footprint or surfacemount accessory mounting plates are available for the chime.
Aesthetics. The SpectrAlert chime and chime/strobe incorporate the stylish, low
profile design consistent with all SpectrAlert wall-mount products, and is available in red and white to meet specific installation requirements.
S4011
7135-1209:206 7135-1209:216
397-00-E 291-01-E
Engineering Specifications
General Electronic chime and chime/strobe shall be a System Sensor SpectrAler t model ______________. The chime shall be listed to UL 464 for fire protective signaling systems and shall per form in accordance with private mode emergency and general utility signaling. The strobe shall be listed to UL1971 and shall be approved for fire protective signaling. The strobe shall comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The chime shall have sixteen field-selectable tone options, each with three volume settings. These options shall be activated through the appropriate settings on a DIP switch located on the rear of the unit. The chime shall be capable of mounting to a standard 4 x 4 or 112 back box or a single gang 2 x 4 178 back box. The chime/strobe shall be capable of mounting to a standard 4 x 4 or 112 back box. The chime shall operate at 12 or 24 volts and the chime/strobe shall operate at 24 volts. Both chime and chime/strobe shall be powered from a non-coded power supply and shall be capable of operating from either a regulated DC or full wave rectified, unfiltered power supply. Chime and chime/strobe shall have an operating temperature range of 32F to 120F.
Specifications
Input Terminals 12 to 18 AWG Dimensions Chime with mounting plate: 5 x 55/8 x 21/4 Chime/Strobe: 6 15/16 x 5 x 27/16 Operating Temperature 32F to 120F (0C to 49C) Weight Chime: 0.5 lb. (0.2 kg) Chime/Strobe: 1.5 lbs. (0.6 kg) Mounting Chime: Single gang, 4 x 4 back box Chime/Strobe: 4 x 4 back box Voltages Chime: 12 or 24 VDC and FWR unfiltered* Chime/Strobe: 24 VDC and FWR unfiltered* *Must be powered with a non-coded power supply Operating Voltage Range* Chime: 8-33V Chime/Strobe: 16-33V Sound Output (UL Reverberant)** 12VDC: 54 dBA 24VDC: 60 dBA *Factor y default settings (1.0K repeating 1 second chime @ high volume) shown. Refer to installation manual for sound output levels at each tone selection.
Electronic Chime Current Draw*
8-33VDC: 10-61mA
*Average current draw varies with tones selected. Current ratings per System Sensor testing at 12VDC and 24VDC. Add current values when connecting in parallel. 8 Volts Tone 1.2K Repeating 1-Second Chime 1.0K Repeating 1-Second Chime 0.8K Repeating 1-Second Chime 1.2K Repeating 1/4-Second Chime 1.0K Repeating 1/4-Second Chime 0.8K Repeating 1/4-Second Chime 1.2K Temporal 3 Chime 1.0K Temporal 3 Chime 0.8K Temporal 3 Chime 1.2K Single Stroke Chime 1.0K Single Stroke Chime 0.8K Single Stroke Chime 3.0K Continuous Electromechanical 3.0K Temporal Electromechanical 0.5K Continuous Electromechanical 0.5K Temporal Electromechanical Low 51 48 47 53 49 48 51 48 46 52 47 47 56 51 48 45 Med. 52 50 47 54 50 50 52 49 47 53 48 48 57 52 49 47 High 55 54 53 58 54 53 56 54 51 58 53 53 61 56 53 51 Low 53 51 49 55 51 50 52 49 48 52 50 49 59 53 51 47 12 Volts Med. 54 52 51 57 53 52 54 51 50 54 51 50 60 54 52 49 High 56 54 52 59 54 53 55 51 51 56 59 52 67 61 56 53 Low 57 54 53 59 55 54 55 53 52 56 53 54 65 56 54 51 24 Volts Med. 61 57 55 61 57 56 57 55 54 58 55 56 68 59 57 52 High 52 60 58 64 60 59 61 58 57 62 58 60 70 62 60 58 Low 59 57 55 61 57 56 58 55 54 58 56 56 68 58 56 52 33 Volts Med. 61 60 58 63 59 58 60 57 56 60 58 59 70 60 55 54 High 64 62 60 66 62 61 63 60 59 64 62 61 74 64 61 60
Strobe Current Draw
Candela Model No. Setting CH24MC 15 Chime/Strobe 15/75 30 75 110 FWR Operating Current-Strobe (mA RMS) 64 74 93 158 208 DC Operating Current-Strobe (mA RMS) 59 69 90 160 209
Ordering Information
Description Chime/Strobe Sur face Mount Backbox Skir t Chime Small Footprint Mounting Plate Sur face Mount Back Box Skir t Universal Mounting Plate (Replacement) Red CH24MC BBS-CHSR CH1224 S-MP BBS D-MP White CH24MCW BBS-CHSW CH1224W S-MPW BBSW D-MPW Candela 15, 15/75, 30, 75, 110 N/A N/A N/A N/A N/A Voltage 24 N/A 12/24 N/A N/A N/A
System Sensor Sales and Service
System Sensor Headquarters 3825 Ohio Avenue St. Charles, IL 60174 Ph: 800/SENSOR2 Fx: 630/377-6495 www.systemsensor.com System Sensor Canada Ph: 905.812.0767 Fx: 905.812.0771 System Sensor Europe Ph: 44.1403.891920 Fx: 44.1403.891921 System Sensor in China Ph: 86.29.8832.0119 Fx: 86.29.8832.5110 System Sensor in Singapore Ph: 65.6273.2230 Fx: 65.6273.2610 System Sensor - Far East Ph: 85.22.191.9003 Fx: 85.22.736.6580 System Sensor - Australia Ph: 613.54.281.142 Fx: 613.54.281.172 System Sensor - India Ph: 91.124.237.1770 x.2700 Fx: 91.124.237.3118 System Sensor - Russia Ph: 70.95.937.7982 Fx: 70.95.937.7983
A05-0282-005*06/04*#1301
(c) 2004 System Sensor. The company reserves the right to change product specifications without notice.

▲Up To Search▲

Price & Availability of CH1224

	To Download CH1224 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .